NadisoLab Flexible HoodFlexible Hood

Product

See What We Have

When people work in Laboratory, they must be surrounded by any substances. In most industrial fire accidents, the direct or indirect causes are associated with the flammability classification of goods

See Our Products

Flexible Hood

Flexible Hood

Description

Nadiso® provides special feature flexible hood. The joint is well designed which can be rotated until 360° so it will suitable in any position. All the material including hood made of PP.

Why Using Flexible Hood?

In laboratory, you must be work with dangerous chemical substances. Some of them are volatile which easy to become vapor though in room temperature. If inhaled of course will cause fatal damage. Nadiso provides a flexible hood which special design so you will feel safe wherever you work in. This hood can be assembled in ceiling, wall, and table. With system similar to fume hood, the dangerous gases will sucked and exhausted through ventilation hood.

About Nadiso® Flexible Hood

Nadiso® provides special feature flexible hood. The joint is well designed which can be rotated until 360o so it will suitable in any position. All the material including hood made of PP which has the high resistance of chemical. And the type of hood, are able to suck the dangerous gas efficiently. There is thumbscrew which make it easier to install and you don’t have to tighten with another tool on body part. With the 3 joint of flexible hood and various arm length, it can be used until 3.2 meters of distance from the ceiling to the work area.

Typical Uses

Flexible Hood was designed to remove gasses, smoke, fumes, smells and dust particles with the utmost safety. New accessories for the system are under constant and ongoing development in order to achieve optimal flexibility for the wide range of uses to which it is put.

Extraction using an exhaust arm

An exhaust arm extraction system can be used for any workstation where harmful substances are present in dangerous concentration.

Availability the system

An extraction arm from is available in three different mounting models - table, wall or ceiling mounted. The extraction arms consists of three basic parts - the arm itself, a hood and a bracket for mounting. The range of hoods and brackets can be found under choosing the extraction system.

 

 

 

 

Top